restricted lock cylinder and key

Secure6 is a restricted keying system designed and available to locksmiths in Australia and New Zealand.

The design of the key is protected against illegal duplication until 2024. This gives peace of mind that your keys can not be duplicated by a key cutter or locksmith. Only the locksmith authorised to cut extra keys for the restricted system will duplicate the keys. The keys will only be duplicated once the identification of the system owner or authorised person is confirmed.

restricted lock cylinder
Secure6 Lock and barrel

This makes handing a key to a tenant, contractor, real estate agent, friend or any other person a lot safer. Locks do not have to be changed as you can be confident the keys were not duplicated by a key cutter.

restricted key
Secure6 key blank 6 pin

There are a wide variety of lock barrels available for the Secure6 restricted key system. The lock barrels are made in Australia to suit our specific needs. Barrels are made for Lockwood locks, Abus, Schlage, Whitco, and many more brands of locks. With so many lock barrels available there is no limit to where you can use the secure 6 restricted key system.

House doors, Commercial doors, glass doors, padlocks, security screen doors, Euro locks, deadlocks, block locks, lockable bolts, utility locks, garage locks, car park entry, gates, foyer entry, fire doors, apartment doors, electronic switch locks, etc can all be placed on a secure6 restricted key system.

series 6 locks Brisbane
A Secure6 key can work in many different locks

You can easily make just one key work in all secure6 locks. Even locks of different brands will now be able to open on the same secure6 key. As the lock barrels are replaced to all the same profile there will be no limits to the keying possibilities. Locks can be master keyed for a large commercial building or hotel with levels of access to suit your building.

restricted key profile
Side warding of key

The secure6 keys are made from hard nickel silver. Nickel silver is strong and hard wearing. The series6 keys will not break like brass or steel keys can. In heavy use areas the keys will not wear down and will maintain their accuracy for years to come. The keys are made by Silca in Italy and are milled very precisely to ensure quality of the lock system.

restricted key lock cylinder
Secure6 lock cylinder

The lock barrels are each made to exact specifications and to very tight tolerances. The lock barrels can have hardened inserts installed to prevent drilling the barrels out. The unique profile of the key and warding inside the lock barrel insure no other key will fit into this lock.

restricted key end profile
warding profile of key

When a secure6 system is installed, it is often possible to use the existing locks in a building and just change the lock barrel. The lock barrels are designed to match up with the most common locks in Brisbane. This can save a lot of money in the installation of a restricted key system as only a new lock barrel is required.

plastic inserts secure6 Brisbane
Plastic inserts for secure6 keys

The keys can have a colourful plastic insert in the head of the key. This is for easy identification of a certain key. Certain levels of master keys can each have their own colour, or you can have a colour for each person with a key. The head of the secure6 key is larger then most standard keys. The larger head makes it much easier to operate the secure6 locks.

Leave a Reply

Your email address will not be published. Required fields are marked *